Selection Guide

8
The VT8000 Series is a sophisticated addition to the Viconics product portfolio of room controllers.
With rich, customizable features, the VT8000 Series enables significant energy savings with accurate
temperature control in any space. The VT8000 room controllers can be easily integrated into most
Building Management Systems (BMS).
The perfect balance between simplicity and sophistication
VTR8300 Series (with VC3000) VT8300 Series VT8600 Series
>
Line voltage fan coil units
>
Low voltage fan coil units
>
Mixed voltage fan coil units
>
Zone control
>
Rooftop units
>
Heat pumps
>
Indoor air quality
Line voltage fan coil units
• Requires VC3000 relay pack
• Fan speed and sequence of operation
• Two pipe
• Four pipe
Low voltage fan coil units
• Fan speed and sequence of operation
• Two pipe
• Four pipe
Mixed voltage fan coil units
• Requires SC1300/SC2300 relay pack
Zone control
• Cooling only VVT zone with reheat
• Fin-tube radiators
• Cabinet heaters
• Radiant panel heaters
• Electric re-heat zones
• Pressure dependent VAV system
• Terminal reheat
Rooftop units, heat pumps and
indoor air quality
• Economizer
• CO2 sensor input
• Fresh Air Station input
Configurable stages
• 1 heat/1 cool
• 2 heat/2 cool
• Modulation heat/2 cool
• 3 heat/2 cool
Configurable languages
Configurable user interface
Configurable color schemes
Common features
• Configurable sequence of operations
• BACnet COV
• Scheduler
• Programmable with Lua4RC to modify control
sequences or override inputs and outputs
• Optional on-board relative humidity sensor with
dehumidification control sequences
• Optional on-board PIR motion sensor with
occupancy-based control sequences
20 congurable languages
available for the VT8000
Series Room Controllers.