Submittal Sheet

PIR Ready VT7200 Series
24 Vac Low Voltage Zoning Thermostats
For Commercial HVAC Applications
(Issue Date December 08, 2010 – 028-8040_R0)
Product overview
The VT7200 PI thermostat family is specifically designed for zoning
applications.
Typical applications include local hydronic reheat valve control and pressure
dependent VAV with or without local reheat. The product features a backlit LCD
display with dedicated function menu keys for simple operation. Accurate
temperature control is achieved due to the product’s PI proportional control
algorithm, which virtually eliminates temperature offset associated with
traditional, differential-based thermostats. Models are available for 3 point
floating and analog 0 to 10 Vdc control. In addition remote room sensing is
available.
They all contain an SPST auxiliary switch that can be used to control lighting or
auxiliary reheat. 3 additional inputs are also provided for monitoring and / or various advanced functions.
All devices are also available with Echelon, BACnet MS-TP or Zigbee wireless network adapter.
The thermostats are also compatible with the new Viconics PIR cover accessories. Thermostats equipped with a PIR
cover provide advanced active occupancy logic, which will automatically switch occupancy levels from Occupied to
Stand-By and Unoccupied as required by local activity being present or not. This advanced occupancy functionality
provides advantageous energy savings during occupied hours without sacrificing occupant comfort. All thermostats
can be ordered with or without a factory installed PIR cover ( see ordering notes below ).
• The additional following documents are available at: www.viconics.com
• PIR application information and examples, are available on document: APP-PIR-Guide-Exx
• PIR cover installation information is available on document: PIR Cover Installation-Exx
• Information on the LON models (VT7200x5x00E), is available on document ITG-VT72_73-PIR-LON-Exx
• Information on the BACnet models (VT7200x5x00B), is available on document ITG-VT72_73-PIR-BAC-Exx
• Information on the Wireless models (VT7200x5x00W), is available on documents: ITG-VWG-40-BAC-Exx and LIT-VWG-
40-SETUP-Exx
Models available
Viconics Part Numbers
VT7200C5x00
VT7200C5x00B (BACnet)
VT7200C5x00E (Echelon)
VT7200C5x00W (Wireless)
VT7200F5x00
VT7200F5x00B (BACnet)
VT7200F5x00E (Echelon)
VT7200F5x00W (Wireless)
Control Outputs 2 x Tri-state floating 2 x Analog 0 to 10 Vdc
1 x Auxiliary or reheat contact 1 x Auxiliary or reheat contact
Ordering Information Notes:
• Thermostats can be ordered with a factory installed PIR cover. Please use (5500) extension instead of the (5000) only
extension.: Ex. VT7200C5500E.
• Thermostats ordered without a PIR cover can be retrofitted with a separate PIR accessory cover afterwards when required
Features and benefits
Features Benefits
• Advanced occupancy functions ⇒ Through the network or smart local occupancy
sensing
• Ready for PIR accessory cover
⇒ Fully integrated advanced occupancy functionality with
a PIR accessory cover
• 3 configurable inputs ⇒ Adds functionality
• Pre-configured sequences of operation ⇒ One model meet more applications
⇒ Reduces project delivery cost
• Unique configuration setup utility ⇒ Minimizes parameter tampering
• Lockable keypad ⇒ Tamper proof, no need for thermostat guards
• Available for 24 Vac On/Off, Floating or Analog
control
⇒ Meet advanced applications requirements
• Auxiliary output ⇒ Can be used for lighting or reheat
• Available with various open industry standards
communication adapters
⇒ Adds network integration functionality for additional
savings
028-8040-R0-CS-VT7200-PIR-E00.doc www.viconics.com / [e-mail]
Fig.1 - VT7200 Series