User Guide

VT8600 Series
11
User Interface Guide
© 2014 Viconics Technologies. All rights reserved.
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2
Previous Next
Page Page
1/3 Zigbee network
COM address 254
Node type Router
ZigBee PAN ID 25
ZigBee channel 15
ZigBee short 0x0000
ZigBee status No NWK
Change Value
ZIGBEE PRO NETWORK SETTINGS
The ZigBee Pro set-up screen shows when a ZigBee card is detected in the model. Select the desired parameter and use up or down
arrows to set the parameter to the desired value.
Back to Setup Page
PARAMETER DETAILS
Conguration parameters default value Signicance and adjustments
Com address
Terminal Equipment
Controller networking address
Default value: 254
Range value: 0 - 254
Communication Address
For wireless models, the use of COM address is not mandatory.
The COM address is an optional way to identify a device on the
network.
Status of controller
detecting a ZigBee
®
network. Will display
Online when connected
successfully to network.
ZigBee
®
Pro short
address. The address is
generated once the device
joins a ZigBee
®
network.