User Guide

VT8600 Series
21
User Interface Guide
© 2014 Viconics Technologies. All rights reserved.
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2
PARAMETER DETAILS SCREEN 3/10
Conguration parameters default value Signicance and adjustments
Deh. hysteresis
Default value: 5% RH
Humidity Control Hysteresis
Used only if dehumidification sequence is enabled:
Range: 2 to 20% RH
Models with humidity sensor only.
Deh. lockout
Default value: Enabled
Dehumidification Lockout
Typically toggled through the network. This variable enables or
disables dehumidification based on central network requirements
from the BAS front end.
Enabled: Dehumidification Authorized
Disabled: Dehumidification Not Authorized
Models with humidity sensor only.