User Guide

VT8600 Series
33
User Interface Guide
© 2014 Viconics Technologies. All rights reserved.
Viconics Technologies Inc. 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I [phone]
028-0441-01 www.viconics.com April 2
PASSWORD SETTINGS
The following shows you how to set-up the password for the Installer and User
Installer Password
1. Installer password prompt shows only if password value is greater than 0000. A password value of 0000 disables installer
password but does not restrict access to conguration options.
2. Installer password prompt automatically disappears after 10 seconds if no value is entered.
3. An error code is automatically generated if incorrect password is entered.
4. Installer is permitted access to all Installer functions and menus when correct password is entered.
NOTE: When the schedule menu is enabled OR when the 5th button is set to schedule or custom, the clock, occupancy command,
schedule or custom pages are NOT password-protected. Always use a system password when the Room Controller is in regular use to
avoid inadvertent changes of the Room Controller logic.
Installer Password
0
1
2
3
4
5
6
7
8
9
Enter the code