Manual

UG:110 vicorpower.com Applications Engineering: 800 927.9474 Page 24
Current Share Boards - Optional Feature (Cont.)
Figure 13. Cable Drawing
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
12
34
56
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
Pin Description
1Po wer
2T1
3 -V1
4T2
5 -V2
6 No Connection
J1 Pinout
Figure12. Mechanical Drawing
Specifications:
1. Power: 2-50 Vdc at 5 mA maximum.
2. Accuracy: +/- 1 mV between -Vout connections.
3. Output current when not trimming up: +/- 1 uA (VI-200/VI-J00), +/-5 uA (Maxi).
4. Use four non-plated through holes with standos for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 converters.
6. CSB02 MUST be used for current sharing Maxi converters.
PLEASE NOTE: THE CSB IS NOT INTENDED FOR HOT-SWAP APPLICATIONS
Contact your Regional Applications Engineer at 1-800-927-9474
for additional information.