Instruction Manual
UG:013 vicorpower.com Applications Engineering: 800 927.9474 Page 2
The PRM
®
evaluation board can be used to demonstrate a stand-alone buck-boost
regulator or in conjunction with a VTM evaluation board to enable evaluation of a
Factorized Power Architecture
™
(FPA) system. There are many combinations possible
using PRM and VTM evaluation boards, but the focus in this user guide is using one
PRM evaluation board and one VTM evaluation board, with a brief overview of how to
parallel boards.
The PRM module evaluation board can be used to configure various modes of
regulation depending upon the application requirements. (1) AL Operation: the PRM
uses a unique feed-forward scheme that enables precise regulation of an isolated
POL voltage without the need for remote sensing and voltage feedback. (2) Remote
Sense Operation: the internal regulation circuitry is disabled and an external control
loop and current sensor maintain regulation. This aords flexibility in the design of
both voltage and current compensation loops to optimize performance in the end
application. In Remote Sense Operation, PRM can be set in local sense mode or in
non-isolated remote sense mode depending on the application.
PRM
Part Number (PS10)
Evaluation Board
Number
Description
Input
Voltage
(V)
Output
Voltage
(V)
Output
Power
(W)
PRM48AF480T400A00 PRD48AF480T400A00
Full-Chip
PRM
Evaluation
Board
48 V
(36 V to 75 V)
48 V
(20 V to 55 V)
400 W
PRM48BF480T500A00 PRD48BF480T500A00
48 V
(38 V to 55 V)
48 V
(20 V to 55 V)
500 W
MPRM48NF480M500A00 MPRD48NF480M500A00
PRM48JF480T500A00 PRD48JF480T500A00
48 V
(45 V to 55 V)
48 V
(20 V to 55 V)
500 W
PRM2A01-xxxxxx PRD2A01-xxxxxx User Configured
PRM2A02-xxxxxx PRD2A02-xxxxxx User Configured
PRM48BH480T250A00 PRD48BH480T250A00
Half-Chip
PRM
Evaluation
Board
48 V
(38 V to 55 V)
48 V
(20 V to 55 V)
250 W
MPRM48NH480M250A00 MPRD48NH480M250A00
PRM48AH480T200A00 PRD48AH480T200A00
48 V
(36 V to 75 V)
48 V
(20 V to 55 V)
200 W
PRM48JH480T250A00 PRD48JH480T250A00
48 V
(45 V to 55 V)
48 V
(20 V to 55 V)
250 W
PRM2A03-xxxxxx PRD2A03-xxxxxx User Configured
PRM2A04-xxxxxx PRD2A04-xxxxxx User Configured
Refer to the specific PRM data sheet for detail ratings of the device. It is important to
remain within the device limits when testing.
These boards make it convenient to evaluate the performance of Vicor’s PRM products.
All evaluation boards include sockets to allow easy "plug and play" insertion and
removal of through-hole components and wires while providing kelvin voltage
measurements test points of all pins of the PRM. Evaluation boards are designed to
simplify testing of the product by providing test points and sockets for easy connection
to standard test-equipment, lugs for input/output connections, connectors to allow easy
insertion and removal of the PRM evaluation board and VTM evaluation board.
Table 1.
Evaluation board numbers
and their ratings