User Manual

VICOUSTIC – Visound Acústica Lda – R. Quinta do Bom Retiro Nº 16 Armazém 9 – 2820-690 Charneca da Caparica – Portugal
VAT PT505700034 Tel [phone] Fax [phone] – Email [e-mail] - Web www.vicoustic.com
FLEXI GLUE
Ref.V00131
EAN13 - 5600217588398
Box - 21 x 16 x 24 cm
Weight - 4.5 Kg
Each Strip-1x1000cm ; 5mm(Thickness)
Units per box - 1
ACESSORIES Line
FEATURES Flexi Glue
TECHNICAL DATA Flexi Glue
Vicoustic’s Flexi Glue is designed for use with a variety of materials. Its chemical composition is non aggressive, and therefore certified in
accordance with the most recent European legislation, allowing Flexi Glue to be used in any environment. Flexi Glue is also perfect for use
with polyurethane (foam) or polystyrene (EPS) Vicoustic solutions, ensuring their correct and safe application to a room’s surfaces.
Flexi Glue was designed in collaboration with leading chemical industry professionals. Testing has revealed excellent strength and versatility
when applied to a range of materials.
P RODUCT INFORMATION
FLEXIGLUE
Assembly adhesive for bonding rigid PVC, wood, chip board and gypsum plaster board.
Usable for fixing panels or strips out of wood or plastic. Suitable for expanded plastic slabs or
insulating plates out of glas- or mineralfiber as well as for polystrene foams (Styrofoam). Not
recommended for soft PVC.
Technical Data
Base
Styrene caoutchouc, containing solvent, toluene-free
Styrene caoutchouc, containing solvent, toluene-free
Styrene caoutchouc, containing solvent, toluene-free
Colour
Beige
Beige
Beige
Density
1,15
g/cm
3
DIN 53479, bei 23ºC
Consistency
pasty
Slump
4
mm
according ASTM
Solid content
75
%
Shear strenght
0,25
N/mm
2
after 3 days; PVC/PVC
Open time
1
min
Processing
Preparation The surfaces to be bonded must be dry, clean and free of dust and grease.The surfaces to be bonded must be dry, clean and free of dust and grease.
Bonding
Apply the adhesive evenly with hand or pressure guns on the surfaces to
be bonded. Join them immediatlly. The layer thickness depends on the
consistency of the materials to be bonded. Unilateral application is
possible. In this case, join the parts before formation of a skin on the
surface of the adhesive layer. Press well. Make sure that both surfaces are
well wetted.
Apply the adhesive evenly with hand or pressure guns on the surfaces to
be bonded. Join them immediatlly. The layer thickness depends on the
consistency of the materials to be bonded. Unilateral application is
possible. In this case, join the parts before formation of a skin on the
surface of the adhesive layer. Press well. Make sure that both surfaces are
well wetted.
Cleaning
Körasolv CR
Page 1/2
VisoundAcustica Lda.
Rua de S. Domingos • Nº 14 • 4590-060 Carvalhosa • Paços de Ferreira • Portugal
www.vicoustic.com | [e-mail]
VERSION 1/2010
PROCESSING Flexi Glue
Preparation: The surfaces to be bonded must be dry, clean and free of dust and grease.
Bonding: Apply the adhesive evenly with hand or pressure guns on the surfaces to be bonded. Join them immediately. The layer thickness
depends on the consistency of the materials to be bonded. Unilateral application is possible. In this case, join the parts before formation of a
skin on the surface of the adhesive layer. Press well. Make sure that both surfaces are well wetted.