Installation Manual EN VicDisplay Guitar/Bass
EN MATERIAL NEEDED Included Not Included Screwdriver Level Measuring Tape Wall Plugs and Screws Guitar/Bass Holder VicDisplay Guitar/Bass 1 Double-sided adhesive pad Place the VicDisplay panel in the desired position. Use a bubble level to align it verticaly. Mark the hole centers. Drill Flexi Glue Ultra 2 Drill the holes and insert wall plugs if needed.
Apply the provided stickers 4 Place the VicDisplay panel in on the back of the panel. For the final position. Re-check a better fixation you can use the vertical alignment. Press Flexi Glue Ultra . the panel so that the adhesive pads adhere to the wall. 5 Fix the guitar holder.
Main Office, R&D & Logistics Avenida do Pólo 3, Nº 159, Carvalhosa 4590-137 Paços de Ferreira, Portugal Office Rua Quinta do Bom Retiro Nº 16, Armazém 9 2820-690 Charneca da Caparica, Portugal T (+351) 212 964 100 Info and Sales E sales@vicoustic.com www.vicoustic.com © Vicoustic, 2022 | V2 No parts of this document might be copied and/or published without written consent of Vicoustic.