Product specifications

3
OPERATOR SAFETY INSTRUCTIONS
The HCT-908 is designed only for cutting holes in steel and stainless steel pipe. Using this tool
requires dexterity and mechanical skills, as well as sound safety habits. Although this tool is manu-
factured for safe, dependable operation, it is impossible to anticipate those combinations of circum-
stances that could result in an accident. The following instructions are recommended for safe
operation of this tool. The operator is cautioned to always practice “safety first” during each phase of
use, including setup and maintenance.
1. Read this manual before operating or servicing this tool. Become familiar with the tool’s
operations, applications, and limitations. Be particularly aware of its specific hazards. Store this manual
in a clean area where it is always readily available. Additional copies of this manual are available upon
request by calling or writing to the Victaulic Tool Company.
2. Avoid using the tool in dangerous environments. Do not expose the tools to rain, and do not use
the tools in damp or wet locations. Do not cut holes into pressurized pipe or pipe that is filled with water,
other fluid, or compressed gas. Keep the work area well lit.
3. Do not operate tools in gaseous or explosive environments. The motors in these tools produce
a normal spark, which could ignite fumes.
4. Ground all tools to protect the operator from electric shock.
5. Inspect the equipment.
Before starting the tool, check the moveable parts for any obstructions. Make
sure that the tool’s parts are installed and secured properly.
6. Wear proper apparel. Do not wear loose clothing or jewelry, and keep long hair tied back.
7. Wear protective items when working with tools. Always wear safety glasses, hardhat, foot
protection, and hearing protection. A face or dust mask may be necessary if the cutting operation
produces fine particles.
8. Stay alert. Do not operate the tool if you are drowsy from medication or fatigue. Avoid horseplay around
the equipment.
9. Keep visitors away from the immediate work area. All visitors should be kept a safe distance from
the equipment at all times.
10. Secure work. Use clamps or a vise to hold work.
11. Do not overreach. Maintain proper footing and balance at all times.
12. Remove adjustment keys and wrenches from the tool. Always check to make sure adjustment
keys and wrenches are removed from the tool before operation.
13. Keep work areas clean. Keep the work area around the tool clear of obstructions that could limit the
movement of the operator. Clean up all oil and coolant spills. Remove shavings from the tool to maintain
proper operation.
14. Avoid accidental starting. Do not carry the plugged-in tool with your finger on the trigger.
15. Use proper extension cords for outdoor use. When using the tool outdoors, use only extension
cords marked suitable for outdoor use.
16. Do not force the tool. Do not force a smaller tool or attachment to do the job of a heavy-duty tool.
17. Do not abuse the power cord. Never carry the tool by the cord or yank it out of the receptacle. Keep
the cord away from heat, oil, and sharp objects.
18. Maintain tools with care. Keep tools sharp and clean at all times to ensure the best and safest
performance. Follow the instructions for lubricating and changing accessories.
19. Disconnect tools when not in use. Always disconnect tools when not in use; before servicing; when
changing accessories, such as blades, arbors, and chucks; and before removing the coupon from the hole
saw.
20. Store idle tools. When tools are not in use, store them in a dry, secure place.
21. Disconnect power cord before servicing the tool. Only authorized personnel should attempt to
change hole saws and perform maintenance on the tools. Always disconnect the power cord before
servicing or making any adjustments.
22. Use only Victaulic replacement parts and accessories. Use of any other parts may result in
improper operation and hazardous situations.
HCT908