Specifications

I-P500_20
VIC-PRESS SCHEDULE 10S SYSTEM PRODUCTS
FOR SCHEDULES 5S AND 10S STAINLESS STEEL
PIPE INSTALLATION INSTRUCTIONS REV_D
INITIAL INSTALLATION OF END
PLUG
1. The Vic-Press Schedule 10S End Plug
contains an insertion depth mark, shown
above, to facilitate installation.
2. Install the Vic-Press Schedule 10S End
Plug per the “Product Assembly” section
of this handbook. Make sure the insertion
depth mark on the end plug indicates full
insertion into the Vic-Press Schedule 10S
fitting, as shown above.
STYLES P540/P560 VIC-PRESS SCHEDULE 10S
END PLUGS FOR FUTURE SYSTEM EXPANSION
WARNING
• Read and understand all instructions before attempting to install any Victaulic
piping products.
• Depressurize and drain the piping system before attempting to cut into an
existing Vic-Press Schedule 10S system.
• DO NOT use torches or other heat sources near Vic-Press Schedule 10S System
Products.
• Wear safety glasses, hardhat, and foot protection.
Failure to follow these instructions could result in serious personal injury, improper
product installation, and/or property damage.