Specifications

CAUTION
• Keep fingers away from the locking pin/
locking pin spring pinch point.
Failure to follow this instruction could result
in personal injury.
7a. Push the locking pin fully into the tool until
it clicks.
CAUTION
• Make sure the locking pin is fully
engaged in the tool before attempting to
perform the pressing operation.
The tool will not operate correctly if the
locking pin is not fully engaged, resulting in
tool damage.
TM-PFT510_11
TM-PFT510OPERATING AND MAINTENANCE INSTRUCTIONS MANUAL
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY.
REV_D