Product Manual A
Table Of Contents
- section 1: INTRODUCTION
- section 2: GENERAL SAFETY INFORMATION
- section 3: Regulators: Safety and Operation
- section 4: When You Finish Using the Regulator
- section 5: Statement of Warranty
- CHAPITRE 1: INTRODUCTION
- CHAPITRE 2: Informations Générales de Sécurité
- CHAPITRE 3: Régulateurs: Sécurité et Fonctionnement
- CHAPITRE 4: Quand Vous Avez Fini D’utiliser le Régulateur
- CHAPITRE 5: GARANTIE
- SECCIÓN 1: INTRODUCCIÓN
- SECCIÓN 2: INFORMACIÓN GENERAL DE SEGURIDAD
- SECCIÓN 3: Reguladores: Seguridad y Manejo
- SECCIÓN 4: Una Vez Que Termine de Utilizar el Regulador
- SECCIÓN 5: DECLARACIÓN DE GarantÍA
2-3
SECTION 2:
GENERAL SAFETY INFORMATION
Read and understand all safety and operating instructions provided
before using this apparatus. RETAIN THESE INSTRUC TIONS IN A
READILY AVAILABLE LOCATION FOR FUTURE REFERENCE.
2.01 FIRE PREVENTION
Welding and cutting operations use fire or combustion as a basic
tool. The process is very useful when properly controlled. However,
it can be extremely destructive if not performed cor rectly in the
proper environment.
1. The work area must have a fireproof floor.
2. Work benches or tables used during welding or cutting
operations must have fireproof tops.
3. Use heat resistant shields or other approved material to protect
nearby walls or unprotected flooring from sparks and hot metal.
4. Keep an approved fire extinguisher of the proper size and type
in the work area. Inspect it regularly to ensure that it is in proper
working order. Know how to use the fire extin guisher.
5. Move combustible materials away from the work site. If you
can not move them, protect them with fireproof covers.
WARNING
NEVER perform welding, heating, or cutting operations
on a container that has held toxic, combustible or flammable
liq uids, or vapors. NEVER perform welding, heating, or
cutting operations in an area containing combustible vapors,
flam mable liquids, or explosive dust.