User's Guide

Table Of Contents
PARTS & CONTROLS
www.hasselblad.comCONTENTS
31
1
Menu Button
This button opens the main menu. If the main menu is
already active, the control screen is shown.
2
Cross Button
Function depends on screen information. The button
acts as delete image button in browse mode. The button
moves the selector down in menus. In control screen it
used for parameter selection.
3
Star Button
The star button will zoom out to 9-view in browse mode.
In live view the star button will zoom in to for precise
focusing. It is also used as a select button when controlling
camera settings using buttons.
4
Display button
Function depends on screen information. The button
changes the overlay in live view mode. In menus, it moves
the selector up. When the control screen is active, it is
used for parameter selection.
5
On/Off and browse button
A long-press (press and hold for one second) will turn
On or Off the camera depending on the previous state.
A short-press activates the display and shows the last
captured image.
6
Status LED
Green color: indicates that the camera is ready to make a
capture.
Yellow colour: The camera is busy and not ready to make
a capture.
Red color: Error state
Blinking: The image is written to the card or host comput-
er.
7
Touch display
Multi-touch display with full touch support to control
all settings of the camera as well as panning, pinch and
spread zoom for image review. The display can be tilted
up to 90 degrees upwards.
4.1 PARTS, COMPONENTS, BUTTONS AND CONTROLS
907X Special Edition USER GUIDE
1 2 3 4 5 6
7