User's Guide

USING THE 907X
www.hasselblad.comCONTENTS
52
907X Special Edition USER GUIDE
INTERVAL OPERATION
An active and pending Interval Timer, is indicated both on the
control screen and in live view.
the control screen shows the interval icon
(A) and the interval
time
(B) . To see all settings, tap the Interval Icon to show the
settings screen as described on the previous page.
Live View and preview screens show the same information
with the addition of remaining number of captures
(C) and (D) .
To start the sequence, press the shutter release. If you have
set an initial delay to prevent camera shake, the camera will
rstwaitthepre-setnumberofsecondsshowingablack
screen with a count-down timer, and then start the Interval
sequence.
After a capture, the image will show up on the rear screen,
together with the Interval information.
To end the sequence before all captures have been made,
select
Exit by pressing the star button .
Note!
Live view is turned off during an interval sequence.
Note!
The preview can be turned off in the General Settings >
Preview > Rear Screen
setting.
Note!
During a running interval sequence, you can press the menu
button to activate the control screen to check current status.
Note!
Interval is not supported in Phocus Mobile 2 or when tethered
to Phocus. For tethered operation, use the Capture Sequenc-
er function in Phocus.
Control Screen
Preview Screen after a capture
Live View
A B
C
D