User's Guide

Table Of Contents
USING THE 907X
www.hasselblad.comCONTENTS
58
907X Special Edition USER GUIDE
INSERT THE SD MEMORY CARD
Insert SD card
1 Open the battery and SD card lid by sliding it towards the
back of the camera and then rotate it outwards.
2 When the lid is opened, mount the SD card in the SD card
slot no 1 or no 2
(A)
.
3 Close the lid by rotating it inwards and pushing it in place
towards the front of the camera
(B)
to lock it into position.
REMOVE THE SD MEMORY CARD
Note!
Do not remove a memory card from the camera if the Status
LED
(C)
isblinkingasthiscancorruptthelesonthecardand
result in data loss.
Remove SD card
1 Open the Battery and SD card lid
.
2 Press the SD card a little way in and then release it. The SD
card will then move out from the SD card slot.
3 Grab the card and pull it away from the camera.
4 Close the lid by rotating it counter clockwise and pushing
it in place towards the front of the camera to lock it into
position.
RECOMMENDED MEMORY CARDS
For optimal performance, the following SD memory cards are
recommended to use:
Sandisk Extreme PRO UHS-II 300MB/s
Panasonic V90 UHS-II 280MB/s
Toshiba EXCERIA PRO UHS-II 270MB/s
SONY M UHS-II 260MB/s
Note!
Avoid using Micro SD/TF memory cards with SD card sets.
Some Sony high-speed G UHS-II SD 300MB/s memory cards
might have poor compatibility, and therefore, might not be
able to write image data properly. To avoid this, it is recom-
mended to use only the recommended SD memory cards, as
listed above, to ensure the image data security.
1
2
A
B
C