User's Manual
100
EXAMPLE
In the example shown here:
120 lm length set manually
the lm speed (ISO160) has been set manually
5 frames have already been exposed (therefore with regular 120 lm, 11 frames
remain)
the battery is functional
LOW-BATTERY SYMBOL
The low-battery symbol only appears on the magazine LCD when the battery
needs changing.
FRAME COUNTER SETTING
The frame counter can be set to show either how many unexposed frames remain on a lm or how many frames have
already been exposed. The LCD shows your choice of setting by adding the word Remain as a reminder of the number of
frames remaining or ‘countdown’. Absence of this word implies the opposite, namely, ‘count-up’, so it denotes the number
of the next frame to be used (for example, the gure 4 means three frames have already been exposed). This information is
also automatically displayed on the grip LCD and viewnder LCD though only as a gure above a symbol.
To access frame counter setting:
1) Ensure the magazine settings lock is in the unlocked position.
2) Press the
button until Remain appears.
3) Press either the
button or the button to reach the desired setting (toggle function).
•‘on’ will show the number of frames remaining on the roll.
•‘oFF’ will show the number of the next frame in the series.
4) The new setting will be saved automatically after a time out of ve seconds.
5) Return the magazine settings lock to the locked position.
DATA IMPRINT SETTING
Data imprinting can be activated or deactivated through
the magazine menu.
To access data setting:
1) Ensure the magazine settings lock is in the unlocked
position.
2) Press the
button until the Data symbol appears.
3) Press either the
or the button to reach On or O.
4) The new setting will be saved automatically after a time
out of ve seconds.
5) Return the magazine settings lock to the locked posi-
tion.
NOTE: Operation and changes made to the data imprinting
function are accessed through the camera menu. Please see
separate section for full details.
Manual lm speed setting.
220 lm length setting.
Data imprinting setting.
‘Frames remaining’
counter setting.