User's Manual
55
ZOOMING IN AND OUT
There are four views in Browse mode. Zoom in by using the the Zoom in (
+
) / out (
-
) buttons or True Focus (
+
) and AE-L (
-
)
buttons.
Zoomed View is reached by zooming in from the Standard View. When zoomed in, you can select the area of interest by
using the front and back scroll wheels or the navigation button. A smaller inserted overview of the capture at 100% displays
the position of the enlarged area with a blue frame. While zoomed in, navigate the blue frame (navigator button or scroll
wheels) to view other areas of interest for checking.
Standard Preview displays the full frame partially covered by the information bar at the bottom.
9-Thumbnail View displays an overview of your work so far and helps to nd specic shots. Selection of specic images,
highlighted by a blue frame, is made by the navigation button.
Folder view displays the list of folders saved. The highlighted folder is the current folder and contains the images you were
browsing. Navigate to another folder and then zoom in to reveal its contents if desired.
CREATE NEW FOLDER
SENSOR UNIT MENU > STORAGE > CREATE NEW FOLDER
All new captures are automatically stored in the current folder until directed other-
wise. A newly created folder automatically becomes the ‘current’ folder.
1. Press MENU.
2. Navigate to
STORAGE (use the Rear scroll wheel or the Navigator).
3. Navigate to CREATE NEW FOLDER dialog (use the Front scroll wheel or the
Navigator).
4. The CREATE NEW FOLDER dialog allows folder naming. The rst three-
digits are xed and are automatically incremented for each new folder. The
following ve characters can be assigned as follows:
Use the Front scroll wheel or the Navigator to select each character in turn.
When selected (highlighted as blue) use the
ZOOM button to select the desired
character/digit.
5. Press the
OK button to save.
‘CURRENT’ FOLDER SELECTION
You can re-direct new captures to a selected folder for storage instead of the latest folder created.
1. Enter Browse mode
2. Zoom out (use the
ZOOM out button
) to reach the Folder View.
3. Navigate to the desired folder
(use the Rear scroll wheel or the Navigator and zoom in) and return to the Standard Preview.
4. In this way, the newly selected folder becomes the ‘current’ folder, so all new captures will now be stored there instead.
Standard PreviewZoomed View 9-Thumbnail View Folder View
ZOOM IN
ZOOM OUT
or
or
The last character has been selected
and is colored blue to indicate that it
can be changed. Pressing OK saves
the new name and creates the new
folder which now becomes the ‘cur-
rent’ folder.