User's Manual

69

SERVICE
SENSOR UNIT MENU > SETTINGS > SERVICE
1. Press MENU.
2. Navigate to
Settings (use the Rear scroll wheel or the
Navigator).
3. Navigate to
Service (use the Front scroll wheel or the
Navigator).
4. Navigate to required item (use the Rear scroll wheel or
the Navigator).
5. Press the
True Focus ( ) or AE-L (
) buttons – (or
the
ZOOM button) – to step through options.
6. Save the chosen selection by pressing
EXIT (MENU
button).
SaveLogdata saves a log le on the CF card.
Default Settings resets all sensor unit settings back to fac-
tory settings. See the Appendix in this manual for a detailed
list of the default settings.
Firmware update: Download the latest rmware update for
the sensor unit from the Hasselblad website. Unzip the le
rst and then transfer the “.cim” le to a CF card. Insert the
card in the camera and navigate to “Firmware update”. The
sensor unit will then automatically update.
Tethered power oers options when using a Thunderbolt
to FireWire adapter, for example, on a MacBook Pro. This
particular conguration does not supply enough power
Select this option when using
a Thunderbolt to FireWire
adapter.
Select this option when using
other configurations than
a Thunderbolt to FireWire
adapter.
SETTINGS > ABOUT
SETTINGS > SERVICE

ABOUT
SENSOR UNIT MENU > SETTINGS > ABOUT
The About box will tell you which rmware version is pres-
ent so you can see if you have the latest (which can be down-
loaded from the Hasselblad website). The serial number is
also displayed in case Hasselblad Support need to know it
for any eventual problem solving.
The About box also shows the focus calibration ID (which
must match the information on the grip display under ‘Sys-
tem Status’ to obtain the optimum performance). Each sen-
sor unit is carefully adjusted to match the corresponding
camera body, which in turn produces the matching verica-
tions respectively. If you want to use dierent sensor units
with dierent camera bodies, please refer to a Hasselblad
Service Center for more information.
1. Press MENU.
2. Navigate to
Settings (use the Rear scroll wheel or the
Navigator).
3. Navigate to
Service (use the Rear scroll wheel or the
Navigator).
4. Navigate to About(use the
Rear scroll wheel or the
Navigator).
Navigator Display
Zoom
Menu
to the camera from the computer so in this case the “From
camera” option should be selected. Select “From host” for
all other congurations.
Firewire speed displays the setting for the current transfer
rate.