Instruction Manual

10
LISTENING VIA EXTERNAL DEVICES
LINE-OUT Jacks on the Back of Unit:
You can connect other stereo speaker system to this unit.
1. Connect the external source with an RCA cable (NOT included). One ends
to the L/R Jacks on the back of this unit, the other ends to the same
labelled jacks on external speaker system.
2. Make sure connect the white plug to white jack (left) and the red plug to the
red jack (right).
3. Turn on the connected speaker system (and select LINE IN on the speaker system if needed);
then play your favorite songs on the unit.
LISTENING TO THE RADIO
1. Turn the unit ON by pressing the POWER button.
2.
Set the FUNCTION KNOB to the FM/ position.
3. Select FM using the switch.
4. Turn the TUNING KNOB to tune to a station.
When a stereo station is found, the FM ST/BT
indicator will turn on in red.
5. Turn the VOLUME KNOB to adjust the volume.
LISTENING TO A CASSETTE TAPE
1. Turn the unit ON by pressing the POWER button.
2. Set the FUNCTION KNOB to the AUX position.
3.
To insert a cassette tape, push a tape into the CASSETE TRAY until a "click" is heard. The
cassette tape will only fit in one way. Never force a tape in. Playback starts automatically.
When the tape reaches the end, playback will stop.
4. Turn the VOLUME KNOB to adjust the volume.
To STOP playback and EJECT the tape: Push the TAPE OPERATION BUTTON down until the
tape is ejected. To stop playback, you must eject the tape.
LISTENING TO AN AUX SOURCE
Playing via 3.5mm AUX-IN Jack on the Front of Unit:
1. Turn the unit ON by pressing the POWER button
2. Set the FUNCTION KNOB to
the AUX position.
3.
Connect the 3.5mm AUX-IN cable (included) into the 3.5mm Headphone
jack or AUX OUT Jack of an external audio source, such as CD player,
tablet, MP3 player. And the other end to Aux In jack on this unit.