Instruction Manual

LISTENING TO BLUETOOTH

You can listen to an external Bluetooth

device on the VWRP-3800 built-in speakers.

1. Turn the unit ON by pressing the POWER button.

Set the FUNCTION KNOB to the FM/ position.

Select (Bluetooth) using the switch. The FM ST/BT indicator starts blink in blue which

indi

cates the unit is ready to establish the Bluetooth connection.

4. Ensure that the Bluetooth function is activated in your player (e.g. mobile phone).

Pair your external Bluetooth

device with the "VICTOR VWRP-3800" shown in the list of

devices. If prompted, please enter the password "0000" on your device.

A beep will be heard and the FM ST/BT indicator turns to solid blue, which indicate the

Bluetooth connection is established.

7. Turn the VOLUME KNOB to adjust the volume.

Note:

Because of different device manufacturers, models, and software versions, the playback control

buttons (Play/Pause, Previous, Next, Stop) on the faceplate will NOT always function when the

Wooden Music Center is in Bluetooth mode. Use the control buttons on your external device.

Bluetooth

Transmitter

You can play music on the VWRP-3800 and listen to it on external Bluetooth

speakers, stereo, or

headphones.

1. Disable the Bluetooth function on all devices nearby (e.g. amplifier, sound bar, wireless

headphone, smart phone, iPad).

Play music while in CD, FM Radio, Phono, or AUX mode as described above.

3. Press and hold STOP/PAIR Button till the FM ST/BT indicator starts to blink in blue.

Power on your Bluetooth

device activate its Bluetooth function.

After a few seconds, your turntable will connect to your device and the FM ST/BT indicator turns

to solid blue.

Adjust the volume on your device to desired level.