User's Manual

AirStream 10

If you are using your AirStream 10 outside of the UK, then use the ‘Tune/3. Select

Dial’ and scroll to and select ‘Full scan’. This will start a much wider, national

and local scan. A full scan takes approximately 1 minute but can take up to 3

minutes.

Note:

You may see a ’?‘ displayed alongside a station name. This indicates that the station

is not available/not active. This could occur if you try to tune into a secondary service/

station at a time when it is not transmitting.

Storing a DAB Station Preset

Your AirStream 10 can store up to 4 DAB stations in its preset memories for instant

access to your favourites stations.

When your AirStream 10 is playing the station that you wish to save to a preset, press

and hold the 1-4 preset button that you would like to store the station to. The display

will conﬁrm ‘Preset Stored’.

Note:

When you store DAB radio station presets, these do not overwrite your Internet or FM

station presets.

Note:

If there is already an existing DAB station stored under a preset, it will be overwritten

when you store the new station.

Select a DAB Station Preset

In DAB mode, press the preset number and the AirStream 10 will connect to that

station and begin to play.

Note:

If no DAB station has been stored under the preset, the display will change to ‘Preset

empty’ and then revert to the previously selected station after a few seconds.

DAB Display Information

When listening to a DAB station you can change the information that will appear on

the second line of the display below the station name. There are several different

types of information that are sent by the broadcaster. Press the ‘Info’ key to scroll

through the display options.

Dynamic Label Segment Program Type Multiplex Name

Todays Date Signal Info Signal Error/ Strength

Dynamic Label Segment (DLS) - This is scrolling text information supplied by the

broadcaster. Information could be the name of an artist or music title, DJ’s name,

contact details for the radio station, etc.

Program Type (PTY) - Such as ‘Rock, ‘Pop, Talk’ or ‘News’

Location & Frequency - Displays the broadcasting area and sampling frequency.

Signal Error- The information provided gives details of the signal error rate, shown as

a number between 0 - 99. It will not be possible to satisfactorily listen to a radio with

a signal error rate of 30 or above. Try adjusting the aerial or relocating your AirStream

10 to improve reception.

Signal Information -The data rate at which the signal is being transmitted, codec

and channels.

Todays Date - Date information supplied by the broadcaster.

Preset Stored