User's Manual

AirStream 10

Station Order

There are three different station order options to choose from which change the way

that your DAB stations are displayed in the Station List:

Alphanumeric - The stations are listed in numerical and then alphabetical order. This

is the default setting.

Ensemble - The stations are listed in frequency order.

Valid - The stations that can be received in your area will be reordered to the top of

the DAB station list and those that you cannot receive will be at the bottom, preﬁxed

by a’?’.

To change the station order, when in DAB mode:

Press the ‘Menu’ button.1.

Use the ‘Tune/Select Dial’ to scroll to and select ‘Station order’.2.

Use the ‘Tune/Select Dial’ to scroll through the options and press to select your 3.

desired option.

DAB Mode Display

When a station is tuned in or selected from a preset, below is an example of the

display and what the icons mean

This Symbol will always be displayed when the AirStream 10 is

powered. It symbolises that the product is connected to the mains

voltage supply.

This Symbol indicates the signal strength. Obviously, the more bars

that are visible, the stronger the signal. There are a maximum of 5

bars visible.

These back to back speakers indicate a stereo signal. If the signal

strength is strong enough, this symbol will be shown and means that

it is receiving a stereo signal rather than a mono signal.

This indicates the Preset number of the stored station. This will display

either: P1, P2, P3, P4, or not display anything at all depending on

stored preset number and if it has actually been stored.

This is the time and will be constantly displayed on your AirStream

10.

DAB

Radio 1

Today’s Date:

DD/MM/YYYY

12:00