User's Manual

20
AirStream 10
Changing the Audio Setting
You can change the audio setting of your AirStream 10 to always play stations in
mono, or to switch automatically from stereo to mono when the signal quality is low.
Press the ‘Menu’ key and use the ‘Tune/Select Dial’ to scroll to ‘Audio setting’ 1.
and press to select.
Use the ‘Tune/Select Dial’ to scroll to ‘Stereo or Mono’ or ‘Mono only’ and press 2.
to select.
Storing a FM Station Preset
Your AirStream 10 can store up to 4 FM stations in its preset memories for instant
access to your favourites.
Note:
When you store FM radio station presets, these do not overwrite your Internet or DAB
station presets.
When your AirStream 10 is playing the station that you wish to save to a preset 1.
(see Tuning to an FM station, page 19).
Press and hold the one-touch 1-4 preset button that you would like to store the 2.
radio station to. The display will confirm ‘Preset stored’.
Note:
If there is already an existing FM station stored under a preset, it will be overwritten
when you store the new station.
Select a FM Station Preset
In FM mode, press the preset number and the AirStream 10 will connect to that
station and begin to play.
Note:
If no FM station has been stored under the preset, the display will change to ‘Preset
empty’ and then revert to the previously selected station after a few seconds.
FM Display Information
When listening to an FM station (and the RDS symbol is displayed, see opposite) you
can change the information that will appear on the second line of the display. You can
choose between the frequency, type of show, such as ‘Rock, ‘Pop, Talk ‘or ‘News’,
the time or the date. Press the ‘Info.’ key repeatedly to move through the display
options
FM Mode Display
When a station is tuned in or selected from a preset, below is an example of the
display and what the icons mean
This Symbol will always be displayed when the AirStream 10 is
powered. It symbolises that the product is connected to the mains
voltage supply.
This Symbol indicates the signal strength. Obviously, the more bars
that are visible, the stronger the signal. There are a maximum of 5
bars visible.
These back to back speakers indicate a stereo signal. If the signal
strength is strong enough, this symbol will be shown and means that
it is receiving a stereo signal rather than a mono signal.
This display means that a RDS signal is being received. The Radio
Data Service being transmitted by the broadcaster will have various
pieces of information in it and they can be displayed on your Airstream
10 by pressing the “Info” button and scrolling through the different
pieces of information. Content will vary depending on broadcaster.
This indicates the Preset number of the stored station. This will display
either: P1, P2, P3, P4, or not display anything at all depending on
stored preset number and if it has actually been stored.
This is the time and will be constantly displayed on your AirStream
10.
R.D.S
1
2
3
4
FM
Radio 1
Today’s Date:
DD/MM/YYYY
12:00R.D.S
P3
P3
12:00