Instruction Manual

Specifications:
Roll-In Warmer Specifications
*Note: Approx. Pass- Thru weights, add 15 %
SECTION 1-DESCRIPTION
SECTION 1-DESCRIPTION
6
ONE SECTION TWO SECTION
CHARACTERISTICS Roll-In Roll-Thru Roll-In Roll-Thru
Width,Overall 36-1/2” 36-1/2” 68-7/8” 68-7/8”
Depth,Overall(incl. handles) 36-1/8” 39-7/8” 36-1/8” 39-7/8”
Height,Overall(incl. adj. legs) 84” 84” 84” 84”
Depth, Door(s) Open 90
°°
65-1/4” 98-1/8” 65-1/4” 98-1/8”
Depth, Case Over Ramp 35-7/16 38-1/2” 35-7/16” 38-1/2”
Clear Door Width 27-3/4” 27-3/4” 27-3/4” 27-3/4”
Clear Full Door Height 65-1/4” 65-1/4” 65-1/4” 65-1/4”
Capacity Net (cu. ft.) 33.6 36.2 67.2 72.4
Number of Full Door(s) 1 2 2 4
Volts, Cycles, Phase 208-230/60/1 208 - 230/60/1
Max. Fuse Size T.D. 15 Amps 15 Amps 20 Amps 20 Amps
Feed Wires 2 2 2 2
Heater Watts
per Section( @ 230V )
Total Wattage
(Heaters & Fan @ 230V )
Total Amperes 6.7 6.7 13.0 13.0
CRATED DIM. & WTS.
Height 87” 87” 87” 87”
Width 41-3/4” 41-3/4” 74-5/8” 74-5/8”
Depth 44-3/4” 44-3/4” 44-3/4” 44-3/4”
Cubic Feet 94.1 94.1 168.1 168.1
Stainless Steel 460 lbs 460 lbs 870 lbs 870 lbs
Stainless Steel / Aluminum 440 lbs 440 lbs 810 lbs 810 lbs
Aluminum 400 lbs 400 lbs 770 lbs 770 lbs
1440
1550
1550
3000
3000
1440 1440 1440