Instructions / Assembly

40
ASSEMBLY
Dual Suspension
Dual suspension bikes are equipped with a front fork as well as a
rear suspension generally located below the seat. The piston works
in conjunction with a spring to allow the bike to rotate on a pivot point.
Ensure all attaching hardware is secured and there is no lateral movement
of the rear triangle. The amount of rear suspension travel can be
adjusted by turning the adjustment plate. By turning the adjustment plate
clockwise, you will increase spring tension and decrease travel, while
turning counter-clockwise you will decrease spring tension and increase
travel.
There must be enough tension on the spring to hold
the spring in place. Failure to do this may cause the
mechanism to fail.
Anchor bolt
Spring plate
Spring
Piston
Adjusting plate