Instructions / Assembly

25
ASSEMBLY
Tighten all bolts that clamp the shifters, brakes levers, and bar end to the handlebar
using a 5mm Allen key or Phillips head screwdriver.
(Figure 1) Handlebar with Twist Shifter.
(Figure 2) Top mounted thumb shifter.
Failure to properly tighten clamping bolts may cause sudden
movement of the component resulting in loss of steering control.
1.
Bar end (5mm Allen key)
Shifter binder bolt
(2.5 Allen key)
Brake lever binder bolt
(5mm Allen key)
2.
Shift binder
bolt (Phillips
head or 5mm
Allen key)