Full Product Manual

Operation Mode While Using Bluetooth Multi-Pair:

(Make sure to set your primary and secondary units FIRST! See page 15)

IMPORTANT:

•

The mode can only be switched on the primary unit. If you change the mode on the addtional unit, the

Bluetooth Multi-Pair connection on the additional unit will be disconnected automatically.

• The volume level for the primary and additional unit is independently controlled. They need to be

adjusted separately. (Use a remote control directed at the primary unit to adjust volume. Then use

the same remote and point to each additional unit to adjust the volume.)

• To mute the sound for both the primary and additional units, press the MUTE button twice on the

remote facing the primary unit. (Press once to reduce the primary unit volume by half, while the

additional unit volume will stay unchanged.) If you press the MUTE button with the remote facing the

additional unit, only the additional unit will be muted by half and the primary unit will be unchanged.

• In Bluetooth and USB modes, press the PLAY/PAUSE button to pause or play both the primary

and additional units.

• In AUX-IN, Optical, Coaxial and HDMI modes, the PLAY/PAUSE and PREVIOUS/NEXT buttons have

no functions.

• Change the volume effect by activating the EQ function of the primary unit (press the NORMAL,

ROCK, POP or JAZZ button on the remote control facing the primary unit). The sound effect for the

additional units will be synchronized with the primary unit.

BLUETOOTH OPERATION:

. Press the MODE button of the primary unit to enter Bluetooth Mode, when in Bluetooth pairing status,

you can see the blue and white LED indicators on the primary unit will light up and start blinking.

2. You can now sear

ch for the Primary unit (VH-40) using your external Bluetooth device. Once the device

found, pair with the (VH-40).

3. Once the device is paired, an audible tone will sound from the Master unit.

4. Play audio from your Bluetooth device. Volume can be controlled on your source device and the

speakers. Once playing, the music will be synchronized with the additional units.

USB OPERATION:

1. Press the MODE button on the primary unit to enter USB playback mode, and the blue and orange

LED indicators on the primary unit will light up and start blinking.

Plug a USB memory stick (not included) into the USB PLAYBACK PORT of the primary unit, and it will

start to

play the music from the USB automatically on the primary and the additional units at the

same time.

3. Control the playback on the primary unit.

AUX-IN OPERATION:

1. Press the MODE button of the primary unit to enter AUX-IN Mode. The orange LED indicator on the

primary unit will light up and start blinking.

2. Connect an RCA audio cable to the primary unit.

3. Start and control the playback from your device or the primary unit. The music on the additional

units will be synchronized with the primary unit.