Full Product Manual

ManualsBrandsVictrola ManualsElectricalMemphis Speaker Record Holder with Wireless Bluetooth Connectivity

GENERAL

Symptom Possible Cause Solution

• Unit will not power on. • Unit is unplugged.

• Connect the unit to the AC power

supply.

• Unit will not turn on. • Power switch is not turned on. • Turn the power switch to On.

• No sound output from

speakers.

• The volume level is set too low.

• Mute the sound.

• The input selector does not match

the playback source.

• Adjust the volume.

• Cancel the mute function.

• Select the correct input source.

• Noise / Distortion in sound

output.

• The unit is too close to another

interfering device.

• Turn off the other appliance, and

relocate the unit.

• Unit fails to respond.

• It might result from external factors

such as ESD (Electro-static

discharge).

• Disconnect the power cord and

external audio device. Re-plug in the

power cord after one minute.

BLUETOOTH

• No sound

• The unit is not switched to Bluetooth

Mode.

• Your device’s and/or the unit’s

volume is not turn on.

• Your device is too far from the unit

or there is some obstacle between

your device and the unit.

• Ensure the unit is switched to

Bluetooth mode.

• Move your Bluetooth device closer

to the unit.

• Turn up the volume on your portable

device and/or the unit.

• Turn OFF your Bluetooth device and

unit. Then power them both back ON.

• Sound has a lot of static • Your device is too far away • Bring your device closer to the unit.

• Unable to pair with a

Bluetooth device.

• Your device doesn’t have Bluetooth

connectivity.

• The Bluetooth pairing is not

successful.

• Conrm that your device is Bluetooth

compatible.

• Conrm that the unit is not paired

with another device.

• Re-pair the unit and device again.

BLUETOOTH

MULIT-PAIR

• Cannot use the Multi-Pair

connecting function.

• The primary / additional unit hasn’t

been set, or unsuccessful set.

• Make sure to cancel the BT Multi-Pair

connection before setting.

• Make sure the additional unit is set in

Bluetooth Mode.

For future assistance with your product, call Victrola at

TOLL FREE# 1-877-ITECH-97 (1-877-483-2497).

Please note: As a result of continual improvements, the design and specications of this product are

subject to change without notice.

Made in China.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.Other trademark and track name are those

of their respective owners.

TROUBLESHOOTING GUIDE