Full Product Manual

IMPORTANT NOTE: Please make sure you have all parts before beginning assembly. Please wait until all

steps are completed before tightening bolts. Two people are recommended for assembly.

Step 1: Installing the Side Board

Using the included pieces, attach the side board to the unit by using the side board bolts and the

wood dowels. (See picture inset.)

Step 2: Installing the “L” Bracket

Attach the “L” bracket (included) to the rear side of the unit to attach the side board and the unit panel

by using the screws (included). (See picture inset.)

Step 3: Installing the Unit Legs

Lay the unit at on the oor, face the unit bottom (mounting

position) to the side. Then attach the legs (included) to the

screw holes at the bottom of the unit and tighten them slowly.

Make sure the legs are xed rmly and place the unit back

to the upright position. (See picture inset.)

WOOD DOWEL

SIDE BOARD BOLT

CAUTION: This unit can support a MAXIMUM of 100 lbs

once it is assembled. Do not sit or stand on the unit.

ASSEMBLING YOUR FURNITURE