M1 MONITORS VPM-254
OVERVIE W Back View SP-L Port Function Knob AC Power Port Power Switch SUB-OUT Port RCA Ports AUX-In Port CONNECT THE TWO MONITORS WITH THE BLACK SPEAKER CABLE SP-L Port
Q U I C K S TA R T G U I D E FUNCTION KNOB - BASIC OPERATION POWER: VOLUME: Press and hold for 1-2 seconds to turn the unit ON or OFF. Rotate to raise or lower volume. FUNCTION KNOB - TO CYCLE THROUGH FEATURES ANALOG MODE (AUX-IN/ RCA-IN): Press to play a connected auxiliary device. BLUETOOTH: Press to pair the unit with a Bluetooth device (smartphone). OPERATION OFF FUNCTION ON OPERATION POWER ON/OFF: Flip Switch to Power ON or OFF the Unit.
S I M P L E S E T U P GETTING STARTED BASIC OPERATION With the master power switch in the ON position press and hold the Function Button for 1-2 seconds to power on the monitors. Press the Function Knob to cycle through the following playing modes: BLUETOOTH: Connecting and playing music from a Bluetooth device (smartphone).
BLUE TOOTH PAIRING BLUETOOTH: Connecting and playing music from a Bluetooth device (Smartphone). Turn the unit ON. Simply press the Function Knob to make sure it is in Bluetooth mode (the LED will flash blue). On your device, turn Bluetooth ON. Then search for / select “M1 Monitors” in the settings menu. (Once connected to the M1 Monitors, The Dial will Turn a Steady Blue) Once a device is paired, it will automatically connect each time you enter Bluetooth mode if it is nearby.
SPECIFICATIONS GENERAL Power Requirements ................................................................................. AC 100-240V~50/60HZ Power Consumption .................................................................................. 60 W Speaker ..................................................................................................... 2” Tweeter x2 +4” Woofer x2 Dimensions (W x D x H).............................................................................
W A R N I N G Important Safety Instruction 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5.
S A F E T Y I N F O Safety Information 1. In order to shut off power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as during a vacation. 2. Use of controls, adjustments and performance of procedures other than those specified herein may result in hazardous radiation exposure. 3. To prevent electric shock, match wide blade of plug to wide slot, fully insert. 4.
Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 de Canada d'Industrie.
responsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you. Canada and US Territories The Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory.
