Owners manual

TROUBLESHOOTING GUIDE
In case of trouble with the unit, please look through the problems below and see if
you can solve them yourself before calling your dealer.
CD PLAYER RADIO UNIT WHOLE UNIT
PROBLEM CAUSE SOLUTION
Unit does not turn
ON when POWER
is pressed.
• Unit is unplugged • Connect unit to AC power
supply
No sound comes
out of the
speakers.
• The external speakers are
disconnected.
• The volume is turned down
(to MIN).
• The input selector does not
match the playback source.
• Connect the external
speakers.
• Adjust the volume.
• Re-select the desired input
source.
The sound is
noisy.
• The unit is too close to a TV
set or another similar
appliance.
• Turn off the TV or other
appliance, and relocate the
unit.
The unit does not
act as expected,
or respond.
• External factors such as
ESD (Electro-static
discharge) affect the unit.
• Remove the power cord and
all power supply devices.
Then re-plug the unit after
one minute.
Cannot listen to
any station, or
signal appears
weak.
• The station is not tuned-in
properly.
• A TV set is being used
nearby and is interfering
with the radio reception.
• Properly tune-in the desired
station.
• Turn-off the interfering TV
set.
The sound is
distorted.
• The antenna is not
positioned properly.
• Re-position the antenna
until reception improves.
CD stops
immediately after
starting, or unit
pauses or stops
during play.
• The CD is inserted upside
down.
• The CD is dusty or dirty or
there is condensation on
the CD.
• Insert the CD with the
printed side right-side up.
• Carefully clean and dry the
CD.
No sound. • The CD player is paused. • Press the PLAY/PAUSE
button.
Specific CD is
noisy, or playback
stops or skips.
• The CD is scratched,
damaged or warped.
• The disc is very dirty.
• The CD should be changed.
• Carefully clean the CD.
11