Owner's Manual

BLUETOOTH: Connecting and playing music from an Bluetooth device (Smartphone).
Using the Function Knob, press and hold for 1-2 seconds to turn the unit ON.
Simply press the Function Knob to make sure it is in Bluetooth mode (the dial will ash blue).
On your device, turn Bluetooth ON. Then search for and select “REVOLUTION GO” in the settings menu.
The unit will chime and say “Connected”, while the Function Knob will remain blue.
Use your external device to control playback.
Rotate the Function Knob to adjust the volume if needed.
Note: -Make sure the unit is within 10m (33ft) from your external device for the strongest connection.
-If no sound is playing, the unit may be in Vinyl Stream mode, cycle through the function knob to
make sure it is in Bluetooth mode.
BLUETOOTH PAIRING
VINYL STREAM
™
VINYL STREAM: Playing a Vinyl record on a external Bluetooth speaker or headphones.
Using the Function Knob, press and hold for 1-2 seconds to turn the unit ON.
Simply press the Function Knob to make sure it is in Vinyl Stream mode (the dial will ash white).
Turn ON your external Bluetooth speaker or headphone, and set to pairing mode.
Wait a few seconds for the unit to nd your device.
The unit will chime and say “Connected”, while the Function Knob will remain white.
Use your external device to control the volume.
Note: -In Vinyl Stream mode, internal speakers will be disengaged.
-We recommend placing the Bluetooth device within 1m (3.3') of the product when initially pairing.
-Make sure the unit is within 10m (33ft) from your external device for the strongest connection.
-Vinyl Stream is only compatible with vinyl record playback.
-The product stays in the pairing mode for 30 seconds. If pairing is not properly completed,
follow the above steps again from the beginning after turning all devices OFF.