User Manual

10
Programmed Playback
Up to 20 tracks can be programmed to play in the desired order.
Notes:
- Programmed playback works with CD discs only.
1. Select “CD” mode, then load a CD.
2. While the CD is stopped, press the PROGRAM button.
3. “PROG” indicator lights up and “P01” blinks on the display.
4. Press ( or ) to select a track number.
5. Press the PROGRAM button again to set the next program track, “P02” appears and blinks.
Repeat steps 4 through 5 to program the additional tracks.
6. When the selection of track numbers has been finished, press the PLAY
button ( ) to start program playback.
(Note: when all 20 program tracks are finalized, press the PROGRAM button
once and “FI” will appear on the display)
7. Press the STOP ( ) button twice to cancel the program mode and then
the “PROG” will disappear from the display.
To check the programmed order
In the stop mode, press ( or ) repeatedly to show the track numbers
that have been programmed.
To add a track to the end of the programmed order:
In the stop mode, press the PROGRAM button.
Select a track number by pressing ( or ), then press the PROGRAM button.
The current track will be added to the end of the program.
Listening to an External Audio Device (BT Mode)
In BT (Bluetooth) mode, this unit can play music from external devices which have a built-in
Bluetooth feature.
GETTING CONNECTED USING BLUETOOTH
1. Rotate to select “BT” function. The LED Display will display “bt”.
2. The “BT” LED Display will flash while searching for a device.
3. On your external device turn ON the Bluetooth function.
NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft).
4. Wait a moment for “VTA-270B” to appear on the devices list. Press “VTA-270B” to connect to
the unit. Sometimes a window will ask you for a password. Fill in “0000” then press “OK” on your
external device.
5. Once the Bluetooth connection is successful the “BT” Indicator will remain lit.
6. You can press BACK or NEXT button to skip the previous/next track or control on your device
.
NOTE:
- The PAIR Button will allow you to disconnect from your external while remaining in BT mode.
Simply press the PAIR button to disconnect and search for a new device. Follow the pairing
directions above to connect to the new device.
- Fast Forward / Rewind is only available on your external device.