MODEL: VTA-600B(PC) 8-IN-1 TURNTABLE
Important Safety Instructions .................................................................................... 3 Product Overview ...................................................................................................... 5 Setup / Basic Operation ............................................................................................. 8 Remote Control.......................................................................................................... 8 Listening to a Vinyl Record...
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to laser beam. Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
15. -This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. -Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
Product Overview Front View 1. 2. 3. “PAIR” Press shortly to disconnect the current connection. Press 2 seconds to reconnect the device that has been connected before. “REPEAT” In CD/CD-MP3 or USB mode, press to select a repeat mode. “PROGRAM” In CD/CD-MP3 or USB mode, while the CD/CD-MP3 or USB is stopped, press to program tracks. 4. “SHUFFLE” In CD/CD-MP3 or USB mode, press for shuffle playback. 5. “INTRO” In CD/CD-MP3 or USB mode, press to play every track about 10 seconds.
Right Side View 27. CASSETTE FF & EJECT Press halfway to fast forward, press all the way to end and eject the tape. Rear View 28. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. 29. USB JACK (Recording Only) 30. LINE OUT jacks For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device.
Parts of the Turntable A. Turntable. B. C. D. E. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver. Important: When you transport the unit, turn the screw counterclockwise to secure the turntable. Speed Selector. Tone Arm holder. Tone Arm. Before use, completely loosen the twist tie on the tone arm and uplift F. G. H. Stylus 45 RPM adaptor. Cue-lever. Use this lever to lift the tone arm. tone arm.
Setup / Basic Operation Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Press the POWER button to turn the unit on. 2. Select the source by pressing the corresponding mode button (AUX/ (Bluetooth)/PHONO/CD/USB/TAPE/FM) 3.
Battery Installation 1. Remove the battery compartment cover. 2. Insert 2x “AAA” batteries. (batteries not included) Note: Make sure that they are oriented so their polarity markings, “+” and “-” match the remote’s markings. 3. Replace the battery compartment cover. Battery Replacement When the distance required between the remote control unit and main unit decreases, it is necessary to replace the battery with new ones.
Listening to a Vinyl Record 1. 2. Press the “PHONO” selector button. Gently open the top cover. Note: Be carefully not to pinch your finger when opening/closing the top cover. 3. Place a vinyl record on the turntable. When playing a 45 RPM record, use the included adaptor. 4. Select the appropriate speed (4). 5. Gently push tone arm clip (5) to the right to release the tone arm. 6. Raise the cue lever (6) to lift the tone arm off the tone arm support. 7.
Important: Never place more than one disc on the tray. The disc must be placed in the center of the disc tray. An incorrectly loaded disc can permanently damage the tray door mechanism. Do not push the CD tray – always use the OPEN/CLOSE button. It takes a moment for the unit to load a disc, during which all buttons will be temporarily deactivated.
1. 2. 3. Press “CD/USB” button once to select CD mode, then load a CD. While the CD is stopped, press the PROGRAM button. “PROGRAM” indicator blinks, and “P-01” appears on the display. 4. 5. 6. Press ( or ) to select a track number. Press the PROGRAM button again to set the current track. “P-02” is displayed. Repeat steps 4 thru 5 to program the additional tracks. 7. When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback.
Listening to an External Audio Device (BT Mode) In BT (Bluetooth) mode, this unit can enjoy music from external devices which have a built‐in Bluetooth feature. GETTING CONNECTED USING BLUETOOTH 1. Press “AUX/Bluetooth” button twice to select Bluetooth mode and then the display will show “ ”. 2. Set the Bluetooth function of your external device when the apparatus is on. 3. Set to search Bluetooth device on your external device.
USB Memory Stick Playback 1. 2. 3. 4. 5. 6. 7. 8. Press CD/USB button repeatedly to switch to USB mode. “USB” will appear on the right corner. Note: When no USB is set, “NO USB” will appear on the display. Connect a USB memory stick (not included) into the USB slot and then the number of tracks will show on the display. After that it will begin to playback from the first track automatically. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume.
Programmed Playback Up to 99 tracks can be programmed to play in the desired order. Notes: Shuffle playback does not work during programmed playback. 1. 2. 3. Press “CD/USB” to enter USB mode, then insert a USB memory stick into USB slot. While the USB is stopped, press the PROGRAM button. “PROGRAM” indicator blinks, and “P-01” appears on the display. 4. 5. 6. Press ( or ) to select a track number. Press the PROGRAM button again to set the current track. “P-02” is displayed.
Maintenance / Proper Handling Compact Disc Handling • Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded only on one side) • To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding it carefully by its edges. • To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
Specifications GENERAL Power Requirements Power Consumption Dimensions (W x H x D) Weight AC 100-240V~50/60 Hz 20W 460mm x 243mm x 335mm (approx.) 18” x 9.6” x 13.2” (approx.) 12 kg. (approx.) 26.5 lbs. (approx) AMPLIFIER Output Power Frequency Response 5W+5W 60 to 20,000 Hz SPEAKER SYSTEM Type Impedance Input Power 1-way 8 ohms Max.
Troubleshooting Guide Symptom Possible Cause Solution • Unit • Unit • Connect will not power on. sound output from speakers. GENERAL • No • Noise/Distortion • The volume level is set too low. input selector does not match the playback source. • The in • Unit • It • The • The cassette tape is not inserted properly. • The tape has reached the end. • Cannot • The • Properly TAPE FM RADIO CD PLAYER tape does not play. listen to any station, or signal appears weak.
sound output with external audio device plugged into rear AUX in jack. • No sound • Both AUX in jacks (front and rear) are plugged. • Unplug • The • Ensure • Sound has a lot of • Your • Unable to pair with a Bluetooth device • Your • The • The • The unit is not switched to Bluetooth mode • Your device’s and/or the unit’s volume is not turn up.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
California PROP 65 Warning WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Warranty Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC.
There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.