Victron VE.Bus Configuration Guide
Table Of Contents
- VictronConnect - VE.Bus Configuration guide
- Table of Contents
- 1. Warning
- 2. Introduction
- 3. Limitations
- 4. Overview Video
- 5. Connecting
- 6. Demo Mode Menu
- 7. Display Options
- 8. Status Mode
- 9. Settings Mode
- 10. Description of Settings
- 10.1. General
- 10.2. Grid
- 10.3. Inverter
- 10.4. Charger
- 10.4.1. Enable charger
- 10.4.2. Charge current
- 10.4.3. Float voltage
- 10.4.4. Absorption voltage
- 10.4.5. Repeated absorption interval
- 10.4.6. Repeated absorption time
- 10.4.7. Maximum absorption time
- 10.4.8. Charge curve
- 10.4.9. BatterySafe
- 10.4.10. Lithium battery mode
- 10.4.11. Storage mode
- 10.4.12. Use equalisation
- 10.4.13. Weak AC input
- 10.4.14. Stop after excessive bulk
- 10.5. AC Input Control
- 11. Firmware Updates
- 12. Parallel, Three, Split-phase systems
- 13. Troubleshooting
8. Status Mode
Status is available on Windows, macOS, Android and iOS operating systems.
You can access Status by either the MK3-USB or via Bluetooth with the VE.Bus Smart Dongle.
From the status window it is possible to switch the device On / Off / Charger Only from the switch button icon. It is also possible to
quickly adjust the AC input current limit (if the overruled by the remote panel setting is enabled).
For more information about this mode, and making the connection with the VE.Bus Smart Dongle, please watch this video:
https://player.vimeo.com/video/373231144
VictronConnect - VE.Bus Configuration guide
Page 8 Status Mode