MultiPlus-II 24/3000/70-50 2x120V Manual
Table Of Contents
- MultiPlus-II 12V 3kVA 2x120V
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS - Save these instructions!
- 2. Description
- 3. Operation
- 4. Installation
- 4.1. Location
- 4.2. Connection of battery cables
- 4.3. Connection of the AC cabling
- 4.4. Optional Connections
- 4.4.1. Remote Control
- 4.4.2. Programmable relay
- 4.4.3. Programmable analog/digital input/output ports
- 4.4.4. Starter battery (connection terminal E, see appendix A)
- 4.4.5. Voltage sense (connection terminal J, see appendix A)
- 4.4.6. Temperature sensor (connection terminal J, see appendix A)
- 4.4.7. Parallel Connection
- 4.4.8. Three-phase operation
- 5. Configuration
- 6. Maintenance
- 7. Error Indications
- 8. Technical Specifications
- Appendix A. APPENDIX A: Connection overview
- Appendix B. APPENDIX B: Block diagram
- Appendix C. APPENDIX C: Parallel connection
- Appendix D. APPENDIX D: Three phase connection
- Appendix E. APPENDIX E: Charge algorithm
- Appendix F. APPENDIX F: Temperature compensation
- Appendix G. APPENDIX G: Dimensions
- Appendix H. APPENDIX H: Power flow diagrams
Bulk charging
The AC input voltage is switched through and the charger operates
in bulk mode. The "bulk" LED is on.
BatterySafe
The mains voltage is switched through and the charger is on.
However, the set absorption voltage has not yet been reached. The
"bulk" and "absorption" LEDs are both on.
Absorption charging
The mains voltage is switched through and the charger operates in
absorption mode. The "absorption" LED is on.
Float charging
The mains voltage is switched through and the charger operates in
float mode. The "float" LED is on.
Equalize charging
The mains voltage is switched through and the charger operates in
equalize mode. The "bulk" and "absorption" LED are both blinking.
PowerControl
The AC input is switched through. The AC output current is equal
to the preset maximum input current. The charge current is
reduced to 0A. The "mains on" LED is blinking.
MultiPlus-II 12V 3kVA 2x120V
Page 7 Operation