MultiPlus-II 24/3000/70-50 2x120V Manual
Table Of Contents
- MultiPlus-II 12V 3kVA 2x120V
- Table of Contents
- 1. IMPORTANT SAFETY INSTRUCTIONS - Save these instructions!
- 2. Description
- 3. Operation
- 4. Installation
- 4.1. Location
- 4.2. Connection of battery cables
- 4.3. Connection of the AC cabling
- 4.4. Optional Connections
- 4.4.1. Remote Control
- 4.4.2. Programmable relay
- 4.4.3. Programmable analog/digital input/output ports
- 4.4.4. Starter battery (connection terminal E, see appendix A)
- 4.4.5. Voltage sense (connection terminal J, see appendix A)
- 4.4.6. Temperature sensor (connection terminal J, see appendix A)
- 4.4.7. Parallel Connection
- 4.4.8. Three-phase operation
- 5. Configuration
- 6. Maintenance
- 7. Error Indications
- 8. Technical Specifications
- Appendix A. APPENDIX A: Connection overview
- Appendix B. APPENDIX B: Block diagram
- Appendix C. APPENDIX C: Parallel connection
- Appendix D. APPENDIX D: Three phase connection
- Appendix E. APPENDIX E: Charge algorithm
- Appendix F. APPENDIX F: Temperature compensation
- Appendix G. APPENDIX G: Dimensions
- Appendix H. APPENDIX H: Power flow diagrams
MultiPlus-II 12V 3kVA 2x120V
120/240 V AC-connection Screw terminals 21 mm² (4 AWG)
Weight 22 kg (48 lb)
Dimensions (hxwxd) mm 578 x 275 x 148 (23 x 11 x 6 inch)
STANDARDS
Safety EN-IEC 60335-1, EN-IEC 60335-2-29
Emission, Immunity EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
1. Can be adjusted to 50 Hz
2. Protection key:
a. output short circuit
b. overload
c. battery voltage too high
d. battery voltage too low
e. temperature too high
f. 120 VAC on inverter output
g. input voltage ripple too high
3. Non-linear load, crest factor 3:1
4. At 75°F / 25°C ambient
5. Programmable relay which can be set for general
alarm, DC under voltage or genset start/stop function.
AC rating: 120V / 4A, DC rating: 4A up to 35VDC and
1A up to 60VDC
6. A. o. to communicate with a Lithium-Ion battery BMS
7. The auxiliary output of an early production batch of
this product was rated at 35A instead of 50A. This
batch has serial numbers starting with HQ2107. Later
batches, with 50A aux. output have serial numbers
starting with HQ2114 or higher.
MultiPlus-II 12V 3kVA 2x120V
Page 25 Technical Specifications