MultiPlus-II 12/3000/120-50 Data Sheet

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
GX Touch 50 and Cerbo GX
Provides intuitive system control and monitoring
Besides system monitoring and control the Cerbo GX enables
access to our free remote monitoring website: the VRM Online
Portal
VRM app
Monitor and manage your
Victron Energy system from
your smart phone and
tablet. Available for both
iOS and Android.
VRM Portal
Our free remote monitoring website (VRM) will display all your
system data in a comprehensive graphical format. System settings
can be changed remotely via the portal. Alarms can be received
by e-mail.
Current sensor 100A:50mA
To implement PowerControl and
PowerAssist and to optimize self-
consumption with external current
sensing.
Maximum current: 100A.
Length of connection cable: 1 m. or 5m.
MultiPlus-II 120V 12/3000/120-50 24/3000/70-50 48/3000/35-50
PowerControl & PowerAssist
Yes
Transfer switch
50A
Maximum AC input current
50A
INVERTER
DC Input voltage range
9,5–17 V
19–33 V
38 – 66 V
Output
Output voltage: 120 VAC ± 2%
Frequency: 60 Hz ± 0,1% (1)
Cont. output power at 25°C (3)
3000 VA
Cont. output power at 25°C
2400 W
Cont. output power at 40°C
2200 W
Cont. output power at 65°C
1700 W
Maximum apparent feed-in power
2500 VA
Peak power
5500 W
Maximum efficiency
93%
94%
95%
Zero load power
13 W
13 W
11 W
Zero load power in AES mode
9 W
9 W
7 W
Zero load power in Search mode
3 W
3 W
2 W
CHARGER
AC Input
Input voltage range: 90-140 VAC
Input frequency: 45 – 65 Hz
Charge voltage 'absorption'
14,4 V
28,8 V
57,6 V
Charge voltage 'float'
13,8 V
27,6 V
55,2 V
Storage mode
13,2 V
26,4 V
52,8 V
Maximum battery charge current (4)
120 A
70 A
35 A
Battery temperature sensor
Yes
GENERAL
Auxiliary output
Yes (50 A)
External AC current sensor (optional)
100 A
Programmable relay (5)
Yes
Protection
(2)
a – g
VE.Bus communication port
For parallel, split phase and three phase operation,
remote monitoring and system integration
General purpose com. port
Yes, 2x
Remote on-off
Yes
Operating temperature range
-40 to +65°C (-40 – 150 °F) (fan assisted cooling)
Humidity (non-condensing)
max 95%
ENCLOSURE
Material & Colour
Steel, blue RAL 5012
Protection category
IP22
Battery-connection
M8 bolts
120 V AC-connection
Screw terminals 13 mm² (6 AWG)
Weight
19 kg
Dimensions (hxwxd) mm
578 x 277 x 148
536 x 277 x 147
536 x 275 x 147
STANDARDS
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29,
Emission, Immunity
EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply
Please consult the certificates on our website.
1) Can be adjusted to 50 Hz
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 120 VAC on inverter output
g) input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 75°F / 25°C ambient
5) Switches off when no external AC source available
6) Programmable relay which can be set for general alarm, DC
under voltage or genset start/stop function. AC rating: 120V / 4A,
DC rating: 4A up to 35VDC and 1A up to 60VDC
7) A.o. to communicate with a Lithium Ion battery
Digital Multi Control Panel
A convenient and low-cost solution for remote
monitoring, with a rotary knob to set
PowerControl and PowerAssist levels.
VE.Bus Smart Dongle
Measures battery voltage and
temperature and allows
monitoring and control with a
smart phone or other
Bluetooth enabled device.
Connection Area