User manual

10 manual
victron energy
victron energyvictron energy
victron energy
1.5 Turning the inverter on
When all the above requirements are checked and satisfied and all
connections are made, it’s time to turn on your Phoenix inverter by
pushing the power switch to the ' On ' position.
WARNING
IF THE INVERTER SWITCHES TO AN
‘ERROR MODE’ (SEE CHAPTER 2.1)
DUE TO AN OVERLOAD OR SHORT
CIRCUIT, THE INVERTER WILL
AUTOMATICALLY RESTART AFTER
ABOUT 18 SECONDS.
In case of an over-temperature error, the
inverter will automatically restart after it has
reached an acceptable temperature
NEVER TOUCH THE AC
CONNECTIONS WHEN THE INVERTER
IS STILL RUNNING IN AN ERROR
MODE!
WARNING
THE BUILT IN LARGE ELECTROLYTIC
CAPACITORS CAN HOLD SIGNIFICANT
DC VOLTAGE WHEN THE BATTERIES
ARE DISCONNECTED.
To avoid sparks or short inverter operation, it is
advisable to switch on the inverter for 10
seconds after battery disconnection, before you
transport the inverter.