Technical information

25
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | Fax: [phone]
E-mail: [e-mail] | www.victronenergy.com
MultiPlus
12 Volt
24 Volt
12/2000/80
24/2000/50
12/3000/120
24/3000/70
PowerControl Yes
PowerAssist Yes
Transfer switch (A) 50
Parallel and 3-phase operation Yes
INVERTER
Input voltage range (V DC) 9,5 – 17 V 19 – 33 V
Output Output voltage: 120 VAC ± 2% Frequency: 60 Hz ± 0,1% (1)
Cont. output power at 75 °F (VA) (3) 2000 3000
Cont. output power at 75 °F (W) 1600 2500
Cont. output power at 100 °F (W) 1450 2200
Peak power (W) 4000 6000
Maximum efficiency (%) 92 / 94 93 / 94
Zero-load power (W) 9 / 11 15 / 15
Zero load power in AES mode (W) 7 / 8 10 / 10
Zero load power in Search mode (W) 3 / 4 4 / 5
CHARGER
AC Input Input voltage range: 95-140 VAC Input frequency: 45 – 65 Hz Power factor: 1
Charge voltage 'absorption' (V DC) 14,4 / 28,8
Charge voltage 'float' (V DC) 13,8 / 27,6
Storage mode (V DC) 13,2 / 26,4
Charge current house battery (A) (4) 80 / 50 120 / 70
Charge current starter battery (A) 4
Battery temperature sensor yes
GENERAL
Auxiliary output (5) n. a. Yes (32A)
Programmable relay (6) Yes (1x) Yes (3x)
Protection (2) a - g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
General purpose com. port (7) n. a. Yes (2x)
Remote on-off Yes
Common Characteristics Operating temp. range: 0 - 120°F (fan assisted cooling) Humidity (non condensing) : max 95%
ENCLOSURE
Common Characteristics Material & Colour: aluminum (blue RAL 5012) Protection category: IP 21
Battery-connection M8 bolts M8 bolts (2 plus and 2 minus connections)
120 V AC-connection Screw-terminal 6 AWG (13mm²) Screw-terminal 6 AWG (13mm²)
Weight 13kg 25 lbs 19kg 40 lbs
Dimensions (hxwxd in mm and inches) 520x255x125 mm 20.5x10.0x5.0 inch 362x258x218 mm 14.3x10.2x8.6 inch
STANDARDS
Safety EN 60335-1, EN 60335-2-29
Emission Immunity EN55014-1, EN 55014-2, EN 61000-3-3
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 75 ˚F ambient
5) Switches off when no external AC source available
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) A. o. to communicate with a Lithium Ion battery BMS
Digital Multi Control
A convenient and low cost solution for remote
monitoring, with a rotary knob to set Power
Control and Power Assist levels.
Blue Power Panel
Connects to a Multi or Quattro and all VE.Net
devices, in particular the VE.Net Battery
Controller.
Graphic display of currents and voltages.
Computer controlled operation and monitoring
Several interfaces are available:
- MK2.2 VE.Bus to RS232 converter
Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’)
- MK2-USB VE.Bus to USB converter
Connects to a USB port (see ‘A guide to VEConfigure’)
- VE.Net to VE.Bus converter
Interface to VE.Net (see VE.Net documentation)
- VE.Bus to NMEA 2000 converter
- VE.Bus to E-PLEX converter
- Victron Global Remote
The Global Remote is a modem which sends alarms, warnings and system
status reports to cellular phones via text messages (SMS). It can also log
data from Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a
website through a GPRS connection. Access to this website is free of
charge.
- Victron Ethernet Remote
To connect to Ethernet.
BMV Battery Monitor
The BMV Battery Monitor features an
advanced microprocessor control system
combined with high resolution measuring
systems for battery voltage and
charge/discharge current. Besides this, the
software includes complex calculation
algorithms, like Peukert’s formula, to
exactly determine the state of charge of
the battery. The BMV selectively displays
battery voltage, current, consumed Ah or
time to go. The monitor also stores a host
of data regarding performance and use of
the battery.
MULTIPLUS INVERTER/CHARGER 2KVA AND 3KVA 120V