Victron Quattro Data Sheet

Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
Quattro
48/3000/35-50/50 120V
12/5000/220-100/100 120V
24/5000/120-100/100 120V
48/5000/70-100/100 120V
48/10000/140-100/100 120V
PowerControl / PowerAssist
Yes
Integrated Transfer switch
Yes
AC inputs (2x)
Input voltage range: 90-140 VAC Input frequency: 45 – 65 Hz Power factor: 1
Maximum feed through current
2x 50 A
2x 100 A
2x 100 A
INVERTER
Input voltage range
9,5 – 17 V 19 – 33V 38 – 66 V
Output (1)
Output voltage: 120 VAC ± 2% Frequency: 60 Hz ± 0,1%
Cont. output power at 25°C (3)
3000 VA
5000 VA
10000 VA
Cont. output power at 25°C
2400 W
4000 W
8000 W
Cont. output power at 40°C
2200 W
3700 W
6500 W
Cont. output power at 65°C
1700 W
3000 W
4500 W
Peak power
6000 W
10000 W
20000 W
Maximum efficiency
94 %
94 / 94 / 95 %
96 %
Zero load power
25 W
30 / 30 / 35 W
60 W
Zero load power in AES mode
20 W
20 / 25 / 30 W
40 W
Zero load power in Search mode
12 W
10 / 10 / 15 W
15 W
CHARGER
Charge voltage 'absorption' (V DC)
57,6 V
14,4 / 28,8 / 57,6 V
57,6 V
Charge voltage 'float' (V DC)
55,2 V
13,8 / 27,6 / 55,2 V
55,2 V
Storage mode (V DC)
52,8 V
13,2 / 26,4 / 52,8 V
52,8 V
Charge current house battery (A) (4)
35 A
200 / 120 / 70 A
140 A
Charge current starter battery (A)
4 A (12V and 24V models only)
Battery temperature sensor
Yes
GENERAL
Auxiliary output
(5)
32 A
50 A
50 A
Programmable relay
(6)
3x
Protection (2)
a-g
VE.Bus communication port
For parallel, split phase and three phase operation, remote monitoring and system integration
General purpose com. port
2x
Remote on-off
Yes
Common Characteristics
Operating temp.: -40 to +65˚C Humidity (non-condensing): max. 95%
ENCLOSURE
Common Characteristics
Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21
Battery-connection
Four M8 bolts (2 plus and 2 minus connections)
230 V AC-connection
Screw terminals 13 mm
2
(6 AWG)
Bolts M6 Bolts M6
Weight (kg)
42 lb 19 kg
75 / 66 / 66 lb 34 / 30 / 30 kg
128 lb 58 kg
Dimensions (hxwxd)
14.3 x 10.2 x 8.6 inch
362 x 258 x 218 mm
18,5 x 14,0 x 11,2 inch
470 x 350 x 280 mm
17,5 x 13,0 x 9,6 inch 444 x 328 x 240 mm
17,5 x 13,0 x 9,6 inch
444 x 328 x 240 mm
22.6 x 19,2 x 13,6 inch
572 x 488 x 344 mm
STANDARDS
Safety
EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emission, Immunity
EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Road vehicles
12V and 24V models: ECE R10-5
Anti-islanding
See our website
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high
3) Non-linear load, crest factor 3:1
4) At 25˚C ambient
5) Switches off when no external AC source available
6) Programmable relay that can a.o. be set for general alarm,
DC under voltage or genset start/stop function
AC rating: 230 V / 4 A
DC rating: 4 A up to 35 VDC, 1 A up to 60 VDC
Digital Multi Control Panel
A convenient and low cost solution for remote
monitoring, with a rotary knob to set
PowerControl and PowerAssist levels.
BMV-712 Smart Battery
Monitor
Use a smartphone or other Bluetooth
enabled device to:
- customize settings,
- monitor all important data on
single screen,
- view historical data, and to
- update the software when new
features become available.
Color Control GX and other GX
devices
Monitoring and control. Locally, and also
remotely on the VRM Portal.
MK3-USB VE.Bus to USB interface
Connects to a USB port (see ‘A guide to
VEConfigure’)
VE.Bus to NMEA 2000 interface
Connects the device to a NMEA2000 marine
electronics network. See the NMEA2000 & MFD
integration guide
Computer controlled operation and monitoring
Several interfaces are available:
VE.Bus Smart Dongle
Measures battery voltage
and temperature and allows
monitoring and control of
Multis and Quattros with a
smartphone or other
Bluetooth enabled device
.