Installation

Last update: 2019-08-15 11:42 ccgx:start https://www.victronenergy.com/live/ccgx:start
https://www.victronenergy.com/live/ Printed on 2019-08-15 12:22
in, should be lit or blinking. Two dead lights indicate a connection problem.
WiFi
When using Wi-Fi and the menu shows 'No Wi-Fi adapter connected' check the USB connection to the
Wi-Fi dongle. Try to remove the dongle and insert it again.
When using Wi-Fi and the State shows 'Failure', it might be that the Wi-Fi password is incorrect. Press
'Forget network' and try to connect again with the correct password.
Step 3. Verify VRM Portal Connectivity
Navigate to Settings → VRM online portal, and check the Connection error status:
If a Connection error is shown, the CCGX is not able to contact the VRM database. The connection
error will show an error code that indicates the nature of the connectivity problem. Also, details of the
error message are shown, to facilitate on site IT experts to diagnose the problem.
Error #150 Unexpected response text: A connection succeeded, but the result was incorrect.
This might indicate that a transparent proxy is hijacking the connection. Examples include a
WiFi login page or a cellular providers payment page.
Error #151 Unexpected HTTP Response: A connection succeeded, but the response did not
indicate a successful HTTP result code (normally 200). This might indicate that a transparent
proxy is hijacking the connection. See #150 above for examples.
Error #152 Connection time-out: this could indicate a poor quality internet connection, or a