Installation

Last update: 2019-08-15 11:42 ccgx:start https://www.victronenergy.com/live/ccgx:start
https://www.victronenergy.com/live/ Printed on 2019-08-15 12:22
status into a large screen or screens at the helm of the vessel, so doing away with multiple gauges,
brackets and wiring complications.
A Victron system can be easily integrated into that, as shown in this video:
https://www.youtube.com/watch?v=RWdEQfYZKEs
Functionalities:
Monitor shore power and generator status.
Monitor battery status for one or more batteries. By using the voltage of for example battery
chargers, it can also visualise secondary batteries such as Generator starter batteries.
Monitor the power conversion equipment: chargers, inverters, inverter/chargers.
Monitor AC loads, and DC loads.
Control shore power input current limit.
Control the inverter/charger: switch it off, on, or set it to charger-only.
Optionally open the Victron Remote Console panel; allowing access to further parameters.
Power equipment compatibility:
All Victron inverter/chargers: From a 500VA single phase device up to a large 180kVA three
phase-system, including Multis, Quattros, 230VAC and 120VAC models.
Battery Monitors: BMV-700, BMV-702, BMV-712 and newer, Lynx Shunt VE.Can, Lynx Ion BMS.
Requirements:
Battery system.
Victron inverter/charger.
Victron Battery monitor.
Network cable connection between MFD and a GX device such as a Color Control GX, Venus GX
or an Octo GX.
UTP network cable.
6.2 Detailed instructions
Instructions for Garmin MFDs
Instructions for Navico MFDs
Raymarine: support on Raymarine MFDs is pending a Raymarine firmware update. Subscribe to our
blog (link at the bottom), or for direct customers, monitor our weekly e-mail, to be informed about
that release.
Furuno: support on Furuno MFDs is in the pipeline. There is no expected date of availability.
7 More information resources
CCGX Genset start/stop
CCGX Frequently asked questions
CCGX Firmware upgrade to v2.00 or later