GX Touch 50 Wall Mount Specifications

www.victronenergy.com
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
General phone: [phone] | E-mail: [e-mail]
www.victronenergy.com
Cerbo GX
Supply voltage 8 – 70V DC
Mounting Wall or DIN rail (35mm)
(2)
Communication ports
VE.Direct ports (always isolated) 3
(3)
VE.Bus (always isolated) 2 paralleled RJ45 sockets
VE.Can yes - non isolated
Other
Outer dimensions (h x w x d) 78 x 154 x 48 mm
Operating temperature range -20 to +50°C
Standards
Safety tbd
EMC tbd
Automotive tbd
GX Touch 50
Mounting With included mounting accessories
Display Resolution 800x480
Other
Outer dimensions (h x w x d) 87 x 128 x 12.4 mm
Cable length 2 meter
Notes
1. For more detailed information about the Cerbo GX and the GX Touch 50, please visit the Victron
GX product range page at Victron live:
www.victronenergy.com/live/venus-os:start
2. DIN rail mounting requires additional accessory - DIN35 Adapter.
3. The listed maximum on the `Performance` section in above table is the total connected VE.Direct
devices such as MPPT Solar Charge controllers. Total means all directly connected devices plus
the devices connected over USB. The limit is mostly bound by CPU processing power. Note that
there is also a limit to the other type of devices of which often multiple are connected: PV
Inverters. Up to three or four three phase inverters can typically be monitored on a CCGX. Higher
power CPU devices can monitor more.
DIN35 adapter small
DIN-Rail adapter to easily mount a device
on a DIN-Rail. Suitable for the Cerbo GX.
GX Touch 50 adapter for CCGX cut-out
This adapter is designed to easily replace the
CCGX display with the newer GX Touch 50.
Contents of the packaging are the metal
bracket, the plastic bezel, and four mounting
screws.
Temperature sensor for Quattro, MultiPlus and GX
Device (such as the Cerbo GX)
Optional accessories