Cerbo GX Manual

This method does not require an internet connection. Just a local computer network is sufficient.
Once connected, connect to the GX Device by running the VictronConnect App on a phone, tablet or laptop. Note that will need to
be connected to the same computer network as the Cerbo GX .
This video shows how it is done
https://www.youtube.com/embed/aKJMXxRIkG0
4.3.1. Alternative methods to find the IP Address for Remote Console
In case VictronConnect can't be used, here are a few other methods to find the Cerbo GX, ie. its IP Address.
Link Local Address - Venus.local
When the Remote Console on LAN setting is enabled. A direct connection (via network cable without a router or DHCP server) is
possible. You can access the GX device by typing venus.local or http://venus.local into a web browser, or in VictronConnect when
connected to the same network. Only Enable this function on trusted networks or direct connections. Make sure you have disa-
bled the password check, or set a password first.
IP Address on VRM
On the VRM Portal, you'll find the IP address on the Device List page of the installation. Note that this does require the Cerbo GX
to be connected to the internet.
Cerbo GX Manual
22