Cerbo GX Manual

10. Marine MFD integration by App

10.1. Introduction & requirements

A Glass Bridge is a MFD (Multi-Functional Display) that integrates a boat’s systems and navigation status into a large screen or

screens at the helm of the vessel, so doing away with multiple gauges, brackets and wiring complications.

A Victron system can be easily integrated into that, as shown in this video:

https://www.youtube.com/watch?v=RWdEQfYZKEs

Functionalities:

• Monitor shore power and generator status.

• Monitor battery status for one or more batteries. By using the voltage of for example battery chargers, it can also visualise sec-

ondary batteries such as Generator starter batteries.

• Monitor the power conversion equipment: chargers, inverters, inverter/chargers.

• Monitor solar production from an MPPT Solar Charger.

• Monitor AC loads, and DC loads.

• Control shore power input current limit.

• Control the inverter/charger: switch it off, on, or set it to charger-only.

• Optionally open the Victron Remote Console panel; allowing access to further parameters.

Victron equipment compatibility:

• All Victron inverter/chargers: From a 500VA single phase device up to a large 180kVA three phase-system, including Multis,

Quattros, 230VAC and 120VAC models.

• Battery Monitors: BMV-700, BMV-702, BMV-712 and newer, Lynx Shunt VE.Can, Lynx Ion BMS.

• All Victron MPPT Solar Charge Controllers

Required components:

Cerbo GX Manual