MultiPlus-II to MultiGrid and MultiPlus comparison

ManualsBrandsVictron Energy ManualsDC DC Converters & InvertersVictron Energy Grid-tie inverter MultiPlus C 12/2000/80-30 2000 W 12 V DC - 230 V AC Built-in charge controller

07-05-2019

MultiPlus-II

Comparison sheet

Specifications

1. Block diagrams

MultiPlus-II

24/3000/70-32

PMP242305010

HW rev. 01 and up

MultiPlus-II

48/3000/35-32

PMP482305010

HW rev. 08 and up

MultiPlus-II

48/5000/70-50

PMP482505010

HW rev. 03 and up

MultiPlus-II

48/3000/35-32

PMP482305000

HW rev. < 08

MultiPlus-II

48/5000/70-50

PMP482505000

HW rev. < 03

MultiGrid

48/3000/35-50

MultiPlus

48/3000/35

PowerControl & PowerAssist

Yes

Transfer switch

32A

50A

32A

50A

50 A

16A or 50A

INVERTER

DC Input voltage range

19 – 33 V

38 – 66 V

Output

Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)

Cont. output power at 25°C (3)

3000 VA

5000VA

3000 VA

5000VA

3000 VA

Cont. output power at 25°C

2400 W

4000W

2400 W

4000W

2400 W

Cont. output power at 40°C

2200 W

3700W

2200 W

3700W

2200 W

Cont. output power at 65°C

1700 W

3000W

1700 W

3000W

1700 W

Maximum apparent feed-in power

2500VA

4000VA

2500VA

4000VA

2500VA

Peak power

5500 W

9000W

5500 W

9000W

6000 W

Maximum efficiency

95 %

96%

95 %

96%

95 %

Zero load power

11 W

18W

11 W

18W

25 W

Zero load power in AES mode

7 W

12W

7 W

12W

20 W

Zero load power in Search mode

2 W

12 W

CHARGER

AC Input

Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz

Charge voltage 'absorption'

28,8 V

57,6 V

Charge voltage 'float'

27,6 V

55,2 V

Storage mode

26,4 V

52,8 V

Maximum battery charge current (4)

70 A

35 A

70 A

35 A

70 A

35 A

Charge current starter battery (A)

4 A

n.a.

Battery temperature and voltage

sensor

Yes Yes

Yes

VE.Bus Smart dongle (optional) Yes

GENERAL

Auxiliary output

Yes (32 A)

Relay with 2 minutes turn on delay

Yes (32 A)

Directly connected to the AC input

Yes (16 A)

Relay with 2 minutes turn on delay

External current sensor (optional)

50A

100A

50A

100A

Programmable relay (5)

Yes

Protection (2)

a - g

VE.Bus communication port

For parallel and three phase operation, remote monitoring and system integration

General purpose com. ports

Yes, 2x

Remote on-off Yes, 2 pole

Yes, 3 pole

(Incl. remote Charger only)

Operating temperature range

-40 to +65°C (fan assisted cooling)

Humidity (non-condensing)

max 95%

ENCLOSURE

Material & Colour

Steel, blue RAL 5012

Aluminium, blue RAL 5012

Protection category

IP22

IP20

Battery-connection

M8 Bolts

Four M8 bolts

230 V AC-connection

Screw terminals 13 mm² (6 AWG)

Weight

18 kg

29 kg

18 kg

29 kg

18 kg

Dimensions (hxwxd)

506 x 275 x 147 mm

565 x 323 x 148 mm

499 x 268 x 141 mm

560 x 320 x 141 mm

362 x 258 x 218 mm

1) Can be adjusted to 60 Hz

2) Protection key:

a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high

f) 230 VAC on inverter output g) input voltage ripple too high

3) Non-linear load, crest factor 3:1

4) At 25°C ambient

5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function

AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC

Summary of content (5 pages)

PAGE 1
07-05-2019 MultiPlus-II Comparison sheet Specifications MultiPlus-II 24/3000/70-32 PowerControl & PowerAssist Transfer switch DC Input voltage range Output Cont. output power at 25°C (3) Cont. output power at 25°C Cont. output power at 40°C Cont.
PAGE 2
PMP242305010 PMP482305010 PMP482505010 PMP482305000 PMP482505000 AC-out-2 is connected to the AC output The AC-in current sensor (internal current sensor) of the MultiPlus-II is placed directly on the AC input. AC-out-2 is connected to the AC input, ‘downstream’ of the current sensor.
PAGE 3
MultiPlus-II PMP242305010 PMP482305010 PMP482505010 A Load connection. AC out1. Left to right: N (neutral), PE (earth/ground), L (phase) B Load connection. AC out2. Left to right: N (neutral), PE (earth/ground), L (phase) C AC input: Left to right: N (neutral), PE (earth/ground), L (phase) D Alarm contact: (left to right) NO, NC, COM. E Trickle charge (12 and 24V model only) F Primary ground connection M6 (PE). G M8 battery positive connection. H M8 battery minus connection.
PAGE 4
MultiPlus-II PMP482305000 PMP482505000 A Load connection. AC out1. Left to right: N (neutral), PE (earth/ground), L (phase) B AC input: Left to right: N (neutral), PE (earth/ground), L (phase) C Load connection. AC out2. Left to right: N (neutral), PE (earth/ground), L (phase) D M8 battery positive connection. E M8 battery minus connection.
PAGE 5
MultiGrid A B C D E F G H I K L M N AC input: Left to right: L (phase), N (neutral), PE (earth/ground). 2x RJ45 connector for remote control and/or parallel / three-phase operation (VE.Bus) Load connection. AC out1. Left to right: L (phase), N (neutral), PE (earth/ground). Load connection. AC out2. Left to right: PE (earth/ground), L (phase), N (neutral). Terminals Temperature sensor (not available on the MultiPlus-II: VE.