Manualshelf

MultiPlus-II to MultiGrid and MultiPlus comparison

ManualsBrandsVictron Energy ManualsDC DC Converters & InvertersVictron Energy Grid-tie inverter MultiPlus C 12/2000/80-30 2000 W 12 V DC - 230 V AC Built-in charge controller
12345
3
MultiPlus-II
PMP242305010 PMP482305010 PMP482505010
A
Load connection. AC out1. Left to right: N (neutral), PE (earth/ground), L
(phase)
B
Load connection. AC out2. Left to right: N (neutral), PE (earth/ground), L
(phase)
C
AC input: Left to right: N (neutral), PE (earth/ground), L (phase)
D
Alarm contact: (left to right) NO, NC, COM.
E
Trickle charge (12 and 24V model only)
F
Primary ground connection M6 (PE).
G
M8 battery positive connection.
H
M8 battery minus connection.
I
switch: 1=On, 0=Off, ||=charger only
J
Terminal for: top to bottom:
1. 12V 100mA
2. Programmable contact K1 open collector 70V 100mA
3. External ground relay +
4. External ground relay –
5. Aux input 1 +
6. Aux input 1 –
7. Aux input 2 +
8. Aux input 2 –
9. Temperature sense +
10. Temperature sense –
11. Battery voltage sense +
12. Battery voltage sense -
K
External current sensor
L
2x RJ45 VE-BUS connector for remote control and/or parallel / three-phase
operation
M
Connector for remote switch: Short to switch “on”.