Specifications

APPENDIX A: Connection overview
A AC input (generator input) AC IN-1. Left to right: L1 (phase1), L2 (phase2), N (neutral).
B 2x RJ45 connector for remote panel and/or parallel and 3-phase operation.
C AC output M6. Left to right: N (neutral), L1 (phase1), L2 (phase2),
E Terminals for (left to right): Voltage sense positive +, Voltage sense minus -
F Double M8 battery minus connection.
G Starter battery positive. (starter battery minus: use battery minus cable for connection).
H Terminals for (left to right): temperature sensor positive, temperature sensor minus.
I Double M8 battery positive connection.
J AC input (shore/grid supply) AC IN-2. Left to right: L1 (phase1), L2 (phase2), N (neutral).
K Pushbuttons for set-up mode
L Connector for remote switch:
Short left and middle terminal to switch “on”.
Short right and middle terminal to switch to “charger only”.
M DIP switches for set-up mode.
N Alarm contact: Left to right: NC, NO, COM.
O AC IN-2 M6 common earth connection (ground).
P AC IN-1 and AC OUT M6 earth connection (ground).
Q Primary ground connection M8 (PE).